Name: Mükemmel Sararma Direncine Sahip Yüksek Opaklıklı PU Beyaz Son Kat
Availability: InStock

Mükemmel Sararma Direncine Sahip Yüksek Opaklıklı PU Beyaz Son Kat

İki-bileşen, poliüretan beyaz son kat Yüksek örtücülüğe ve güneş ışığına maruz kaldığında sararmaya karşı iyi dirence sahiptir. Poliüretan yapısı sayesinde suya, deterjanlara ve ev kimyasallarına karşı yüksek kimyasal dirence sahip, fiziksel olarak sert filmler oluşturur.

Ürün No :
Polyurethane White Topcoat
Başvuru :
Used mainly for wooden furniture, also in auto, architecture and more.
Özel Özellik :
Durable, chemical-resistant, adheres well, retains gloss, levels smoothly.

TANIM

Polyurethane (PU) furniture topcoat is a durable, chemical-resistant finish that protects wood with a smooth, glossy or matte appearance. It enhances furniture longevity and aesthetic appeal

Technical Data

Sheen Variants: Full gloss,50%,30%,20%,10% and Full Matt

Colors: White (opaque)

Practical Covering Capacity: For estimation of practical covering capacity, following factors to be taken into account: surface profile, uneven application, over spray, losses in container and equipment etc.

Theoretical covering capacity	Recommended Dry Film Thickness per coat		Theoretical Spread rate ㎡/ltr
	Minimum	40 microns	9.00 ㎡/ltr
	Maximum	60 microns	5.80 ㎡/ltr
	Typical	50 microns	7.00 ㎡/ltr

Drying Time	Substrate Temperature	Sandable Dry	Overcoating Interval
	Substrate Temperature	Sandable Dry	Minimum	Maximum
	25℃	3H	8H	Indefinite
	35℃	2H	6H	Indefinite
	45℃	1.5H	3H	Indefinite

Application Data

Method of application : Conventional spray application

Thinner : PU Thinner

Thinning ratio (per kilogram): Use 60% to 100% for ease of application depending on the gun type .

Available Pack Size: 4LY、4LF、18LF、20LY、200LY

At a temperature of 23 ℃ and a relative humidity of 50%:

Drying time: Refers to 20-60 minutes of touch drying;

Finger press drying: 2-6 hours (actual drying time may vary depending on temperature, humidity, and wind speed)

Theoretical paint consumption:12 square meters/liter/coat. (Dry film thickness:25-30 microns, actual coating area may vary depending on construction method, surface roughness, and construction environment).

Application Steps

1. Substrate Preparation: For blanks or boards, sand with 320-mesh sandpaper; for topcoats, sand with 400-600-mesh sandpaper.

2. Paint Proportioning: The ratio of base coat:hardener:thinner=1:0.5:1.

3. Primer Process: After spraying the first coat of primer, allow air-drying for 5 hours, then sand and re-spray the second coat of primer. A third re-spray is optional if necessary. (Note: The amount of thinner can be appropriately reduced during re-spraying.)

4. Color Adjustment: After primer spraying is completed, color-adjusting oil can be used for color adjustment or color modification.

5. Glazing: Select the required gloss level and apply the corresponding.

Applocation Details

After all construction is completed, protective measures should be taken within 72 hours to avoid damaging the paint film.
Please use Runshine products in conjunction to prevent the occurrence of defects.
Before applying the topcoat, small boards must be made and tested to be qualified before proceeding with large-scale production.
Store in a cool and dry place.
Unused paint after mixing shall not be poured back into the original paint.
Maintain air circulation during construction and drying processes, and equip with appropriate respiratory equipment.
It is advisable to apply multiple layers of thin coating, and the dry film thickness of each coating should not exceed 30 microns.
Before use, it should be thoroughly stirred and mixed evenly. The prepared mixed paint should be used up within the pot life time. Used tools should be immediately cleaned with diluent.

SICAK ETİKETLER :

Mükemmel Sararma Direncine Sahip Yüksek Opaklıklı PU Beyaz Son Kat

poliüretan mobilya boyaları

PU Beyaz Son Kat

PU mobilya boyaları

hızlı kuruyan mobilya boyaları

mobilya boyaları üreticisi

OEM mobilya boyaları

ilgili ürünler